|
|
|
National Stock Number:
3040-00-994-5365
Federal Supply Class:
3040
National Item Identification Number:
009945365
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| C4PM10239-3 | 71867 | DE HAVILLAND AIRCRAFT OF CANADA LIMITED |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.870 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.200 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.915 INCHES NOMINAL | | LINK END THICKNESS | 0.450 INCHES NOMINAL | | OVERALL WIDTH | 1.420 INCHES NOMINAL | | MAJOR DIAMETER | 1.244 INCHES MINIMUM AND 1.252 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-681, COND D FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 1.157 INCHES MINIMUM AND 1.160 INCHES MAXIMUM | | SHAFT END THICKNESS | 0.450 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPLINE QUANTITY | 28 | | SURFACE TREATMENT | CADMIUM |
|
|