|
|
|
National Stock Number:
3040-00-969-2413
Federal Supply Class:
3040
National Item Identification Number:
009692413
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2933-4P | 91363 | NORRISEAL NORRIS VALUES DIV DBA DOVER CO | | 51740C293 | 91363 | NORRISEAL NORRIS VALUES DIV DBA DOVER CO | | 740-293 | 91363 | NORRISEAL NORRIS VALUES DIV DBA DOVER CO | | 740C293 | 91363 | NORRISEAL NORRIS VALUES DIV DBA DOVER CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3070 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.686 INCHES NOMINAL | | OVERALL LENGTH | 2.469 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY A | | SECOND END GROOVE DIAMETER | 0.3594 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 0.4844 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.125 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 4 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|