|
|
|
National Stock Number:
3040-00-967-4811
Federal Supply Class:
3040
National Item Identification Number:
009674811
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 200113GPC67 | 0AT62 | SIEMENS ENERGY, INC. | | 200113GPC67 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 200113GPC67 | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE | | 210566J1 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 210566J1 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | 6044B | 0AT62 | SIEMENS ENERGY, INC. | | 6044B | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 6044B | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | 6044B | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE |
|
Techincal Specification:
| FIRST END DIAMETER | 0.7490 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.999 INCHES NOMINAL | | OVERALL LENGTH | 3.156 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CL AN MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.7490 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SECOND END SLOT DEPTH | 0.500 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.219 INCHES NOMINAL | | STEP QUANTITY | 7 |
|
|