|
|
|
National Stock Number:
3040-00-932-1006
Federal Supply Class:
3040
National Item Identification Number:
009321006
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 035-13000 | 9F512 | PARKER-HANNIFIN CORPORATION | | 035-13000-Z | 9F512 | PARKER-HANNIFIN CORPORATION | | 35-13000Z | 9F512 | PARKER-HANNIFIN CORPORATION | | 35-19031Z | 9F512 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END TONGUE THICKNESS | 0.250 INCHES NOMINAL | | FIRST END TONGUE WIDTH | 0.375 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.875 INCHES NOMINAL | | FIRST END STYLE | TONGUE | | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END HOLE DEPTH | 0.375 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.234 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 |
|
|