|
|
|
National Stock Number:
3040-00-917-1788
Federal Supply Class:
3040
National Item Identification Number:
009171788
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 110257 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1260 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | TEST SET,LINE | | LARGEST STEP DIAMETER | 0.215 INCHES NOMINAL | | OVERALL LENGTH | 0.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND T FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END GROOVE DIAMETER | 0.1080 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0200 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.031 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVE, FLAT AND TAPERED | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END TAPER MAJOR DIAMETER | 0.1250 INCHES NOMINAL | | SPECIAL FEATURES | TAPER ANGLE 45 DEG | | STEP QUANTITY | 3 |
|
|