|
|
|
National Stock Number:
3040-00-833-5329
Federal Supply Class:
3040
National Item Identification Number:
008335329
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1989628-1 | 94580 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0400 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | AUTOMATIC PILOT SERVO CONTROLS | | LARGEST STEP DIAMETER | 1.120 INCHES NOMINAL | | OVERALL LENGTH | 3.300 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250,COMP 2024,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | 1ST END HAS 4 INT. THD HOLES 0.190 IN. DIA 0.750 IN. D,10 AND 32 UNF 2B THD DES,ALT SPACED AT 60 AND 120 DEG APART ON 0.750 IN. DIA BOLT CIRCLE; 2ND END 2ND CROSSDRILLED HOLE DISTANCE BETWEEN CTRS 0.500 IN.,BOTH HOLES COUNTERBORED 0.318 IN. DIA 0.152 IN. D; 2ND END FLAT GROOVED 0.558 IN. D AND 0.840 IN. LG,0.865 IN. FROM END | | SECOND END GROOVE DIAMETER | 0.5940 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0400 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.562 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.2040 INCHES NOMINAL | | SECOND END DIAMETER | 0.6230 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.275 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.035 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|