|
|
|
National Stock Number:
3040-00-800-5701
Federal Supply Class:
3040
National Item Identification Number:
008005701
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 26637946-01 | 45153 | HAMILTON SUNDSTRAND CORPORATION | | 26637946-01 | 55820 | RTX CORPORATION | | 26637946-01 | 79318 | MEGGITT NORTH HOLLYWOOD INC | | 26637946-01 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END SPLINE LENGTH | 1.500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.3710 INCHES MINIMUM AND 0.3720 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.3490 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM | | FIRST END STYLE | SPLINED (STRAIGHT) | | FSC APPLICATION DATA | VALVE,REGULATING,FLUID PRESSURE,POWERED,26340062-01 4810001057284 | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.032 INCHES NOMINAL | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.875 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.3070 INCHES MINIMUM AND 0.3090 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.2900 INCHES MINIMUM AND 0.2910 INCHES MAXIMUM |
|
|