|
|
|
National Stock Number:
3040-00-780-0152
Federal Supply Class:
3040
National Item Identification Number:
007800152
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 4028807 | 6N299 | AGCO CORP PARTS OPN | | 74028807-1 | 6N299 | AGCO CORP PARTS OPN |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 3.531 INCHES NOMINAL | | FIRST END DIAMETER | 0.4990 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4640 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0420 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL | | OVERALL LENGTH | 4.500 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4740 INCHES NOMINAL | | SPECIAL FEATURES | END INTERNAL HOLE 0.188 IN.DIA.0.967 IN.LG,ALSO ONE SLOT 0.062 IN.WIDE 0.969 IN.LG | | STEP QUANTITY | 2 |
|
|