|
|
|
National Stock Number:
3040-00-759-7275
Federal Supply Class:
3040
National Item Identification Number:
007597275
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7597275 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2750 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.3920 INCHES NOMINAL | | OVERALL LENGTH | 0.340 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COM+22,TEMPER 1/2 H FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | SECOND END DIAMETER | 0.3920 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | PINT PER TT-E-529,2 COATS;IN.END HAS SAW SLOT 0.03125IN.020IN.DEEP;2IN.HAS UNTHREADED HOLE 0.160 IN.DIA,CBORERED TO 0.3125IN.BY 0120IN.DEEP | | STEP QUANTITY | 2 |
|
|