|
|
|
National Stock Number:
3040-00-759-5733
Federal Supply Class:
3040
National Item Identification Number:
007595733
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7595733 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.1160 INCHES NOMINAL | | FIRST END DIAMETER | 0.4997 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4740 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0400 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.4997 INCHES NOMINAL | | OVERALL LENGTH | 2.0930 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,TYPE A,CLASS 7 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END HOLE DIAMETER | 0.0940 INCHES NOMINAL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.7340 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 5 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|