|
|
|
National Stock Number:
3040-00-756-1994
Federal Supply Class:
3040
National Item Identification Number:
007561994
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 9142985 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | SURFACE TREATMENT | PASSIVATE | | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL | | THICKNESS | 0.560 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.046 INCHES NOMINAL | | SURFACE FINISH AND LOCATION | 320 MICROINCHES INSIDE PERIPHERY | | 63 MICROINCHES LARGEST BEARING FLAT | | 630 MICROINCHES OUTSIDE PERIPHERY | | 160 MICROINCHES SMALLEST BEARING FLAT | | SECURING HOLE QUANTITY | 8 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 45.0 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.138 INCHES 1ST HOLE | | 0.164 INCHES 2ND HOLE | | 0.138 INCHES 3RD HOLE | | 0.164 INCHES 4TH HOLE | | 0.138 INCHES 5TH HOLE | | 0.164 INCHES 6TH HOLE | | 0.138 INCHES 7TH HOLE | | 0.164 INCHES 8TH HOLE |
|
|