|
|
|
National Stock Number:
3040-00-752-1019
Federal Supply Class:
3040
National Item Identification Number:
007521019
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2335T2 | 22852 | SPALLA INC | | 2335T2 | 56442 | DIAMOND REO TRUCK CO | | 2520007521019 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 30-362-11 | 03716 | T AND J INDUSTRIES INC | | 30-362-11 | 95019 | DANA CORP SPICER TRANSMISSION DIV | | 7521019 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 914090 | 58275 | SASCO INC CANADIAN DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0908 INCHES MINIMUM AND 1.0913 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.426 INCHES NOMINAL | | OVERALL LENGTH | 17.735 INCHES MINIMUM AND 17.797 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46178 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1410 INCHES NOMINAL | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | STEP QUANTITY | 10 |
|
|