|
|
|
National Stock Number:
3040-00-722-3631
Federal Supply Class:
3040
National Item Identification Number:
007223631
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10891649 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2590007223631 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 8.500 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 1.697 INCHES MINIMUM AND 1.702 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 1.505 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | LINK END THICKNESS | 3.697 INCHES NOMINAL | | MAJOR DIAMETER | 4.524 INCHES MINIMUM AND 4.539 INCHES MAXIMUM | | OVERALL WIDTH | 5.969 INCHES MINIMUM AND 6.000 INCHES MAXIMUM | | MATERIAL | STEEL | | MINOR DIAMETER | 4.300 INCHES MINIMUM AND 4.325 INCHES MAXIMUM | | SHAFT END THICKNESS | 2.250 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.723 IN. NOMINAL | | SPLINE QUANTITY | 44 | | SURFACE TREATMENT | PHOSPHATE |
|
|