|
|
|
National Stock Number:
3040-00-719-9311
Federal Supply Class:
3040
National Item Identification Number:
007199311
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 292C881P009 | 07482 | GENERAL ELECTRIC COMPANY | | 292C881P009 | 24446 | GENERAL ELECTRIC COMPANY | | 292C881P009 | 99207 | GENERAL ELECTRIC COMPANY | | 292C881P9 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | 292C881P9 | 24446 | GENERAL ELECTRIC COMPANY | | 292C881P9 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| FIRST END DIAMETER | 0.340 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.340 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | OVERALL LENGTH | 4.320 INCHES MINIMUM AND 4.340 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT ACCESSORY DRIVE, RADIAL, FRONT FRAME | | SECOND END SPLINE MAJOR DIAMETER | 0.340 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | SPECIAL FEATURES | NUMBER OF TEETH: 10 | | SPECIAL TEST FEATURES | ADDENDUM: 0.0156";WHOLE DEPTH: 0.0469"; CIRCULAR PITCH: 0.0982";TOOTH THK CIRCULAR: 0.0460-0.0481";DIAMETER OVER .060 PINS TO CHECK TOOTH THICKNESS: .3992-.4021";HELIX ANGLE: 0 DEGREES; PRESSURE ANGLE: 30 DEGREES | | SUPPLEMENTARY FEATURES | DIAMETRICAL PITCH: 32/64; PITCH DIAMETER: 0.3125" | | UNIT OF ISSUE WEIGHT | 0.0694 POUNDS |
|
|