|
|
|
National Stock Number:
3040-00-719-9243
Federal Supply Class:
3040
National Item Identification Number:
007199243
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 35-79501-1006-2 | 86329 | PARKER-HANNIFIN CORP | | 357950110062 | 86329 | PARKER-HANNIFIN CORP | | GB1826 | 86329 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4985 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | PUMP ROTARY | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 5.482 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4050 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3080 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 12 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.3560 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.406 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.4050 INCHES NOMINAL | | STEP QUANTITY | 2 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|