|
|
|
National Stock Number:
3040-00-712-9347
Federal Supply Class:
3040
National Item Identification Number:
007129347
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 8426068 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 1.0050 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM | | CHAMFER ANGLE IN DEG | 45.0 | | CRITICALITY CODE JUSTIFICATION | ABXV | | HOLE DIAMETER AND LOCATION | 0.3750 INCHES MINIMUM SINGLE HOLE AND 0.3820 INCHES MAXIMUM SINGLE HOLE | | LARGEST DIAMETER LENGTH | 0.500 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.625 INCHES NOMINAL | | MATERIAL | STEEL | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER | | SURFACE TREATMENT | PAINT | | THICKNESS | 0.625 INCHES NOMINAL |
|
|