| END SIMILARITY | NOT IDENTICAL |
| FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL ROTARY |
| INVOLUTE SPLINE PITCH DIAMETER | 0.2480 INCHES NOMINAL SECOND END, THIRD PORTION |
| INVOLUTE SPLINE LENGTH | 0.593 INCHES NOMINAL SECOND END, THIRD PORTION |
| INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| INVOLUTE SPLINE QUANTITY | 12 FIRST END |
| OVERALL LENGTH | 3.125 INCHES NOMINAL |
| MATERIAL | STEEL |
| SCREW THREAD SERIES DESIGNATOR | UNF SECOND END, SECOND PORTION |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SHAFT HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END, SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.218 INCHES NOMINAL SECOND END, FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.250 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.546 INCHES NOMINAL FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.2502 INCHES NOMINAL FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.312 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.3752 INCHES NOMINAL SECOND END, FIRST PORTION |
| WORM BODY LENGTH | 1.234 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 4 DEG 46 MIN |
| WORM OUTSIDE DIAMETER | 0.583 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.500 INCHES NOMINAL |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM THREAD LEAD | 0.131 INCHES NOMINAL |
| WORM THREAD QUANTITY | 1 |
| WORM THREAD SECTION LENGTH | 0.875 INCHES NOMINAL |
| TEETH HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| THREAD LENGTH | 0.281 INCHES NOMINAL SECOND END, SECOND PORTION |
| THREADED SECTION PIN HOLE DIAMETER | 0.070 INCHES NOMINAL SECOND END, SECOND PORTION |
| UNTHREADED SECTION KEYWAY DEPTH | 0.075 INCHES NOMINAL FIRST END, SECOND PORTION |
| UNTHREADED SECTION KEYWAY WIDTH | 0.0625 INCHES NOMINAL FIRST END, SECOND PORTION |