|
|
|
National Stock Number:
3040-00-692-6149
Federal Supply Class:
3040
National Item Identification Number:
006926149
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 119459R1 | 31007 | NAVISTAR INTL CORP | | 119459R1 | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | 126222 | 56232 | LOCKHEED MARTIN CORPORATION | | 126222 | 62983 | EATON AEROSPACE, LLC | | 8332613 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 9672 | 03476 | TEREX REEDRILL DBA REEDRILL TEXOMA DIV TEREX MINING |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL KEYWAY LENGTH | 2.000 INCHES NOMINAL | | FIRST END KEYWAY DEPTH | 0.147 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | FIRST END STYLE | FLAT KEYWAY | | FSC APPLICATION DATA | PUMP,HOIST UNIT,HYDRAULIC,VEHICULAR BODY,DUMP TRUCK | | LARGEST STEP DIAMETER | 1.561 INCHES MINIMUM AND 1.563 INCHES MAXIMUM | | OVERALL LENGTH | 7.531 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.1804 INCHES MINIMUM AND 1.1808 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 1.063 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.1370 INCHES MINIMUM AND 1.1400 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.9950 INCHES MINIMUM | | SECOND END SPLINE QUANTITY | 13 | | SECOND END STYLE | SPLINED (STRAIGHT) | | STEP QUANTITY | 5 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|