|
|
|
National Stock Number:
3040-00-671-5729
Federal Supply Class:
3040
National Item Identification Number:
006715729
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3Q1107D1 | 0ZLV2 | GSE PRODUCTION AND SUPPORT LLC | | 3Q1107D1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 3Q1107D1 | 98296 | STANDARD MFG CO INC | | 56C23014 | 80049 | DEPARTMENT OF THE AIR FORCE | | 56C23014 | 98296 | STANDARD MFG CO INC | | 56C23014-7 | 0ZLV2 | GSE PRODUCTION AND SUPPORT LLC | | 56C23014-7 | 98296 | STANDARD MFG CO INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5000 INCHES NOMINAL | | FIRST END KEYWAY DEPTH | 0.179 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.3130 INCHES NOMINAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.968 INCHES NOMINAL | | FIRST END EXTERNAL KEYWAY LENGTH | 1.312 INCHES NOMINAL | | FIRST END STYLE | INDENTED FLAT KEYWAY | | LARGEST STEP DIAMETER | 1.245 INCHES NOMINAL | | OVERALL LENGTH | 10.875 INCHES NOMINAL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 | | SECOND END GROOVE DIAMETER | 1.2450 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 1.2450 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 3.875 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 3.250 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2450 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.0300 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | STEP QUANTITY | 3 |
|
|