|
|
|
National Stock Number:
3040-00-671-5375
Federal Supply Class:
3040
National Item Identification Number:
006715375
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 76081 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 76081 | 3M833 | TRANSUPPORT INC | | CM-76081 | 0EGF1 | CMP HYDRAULICS INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3800 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.2500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.4160 INCHES MINIMUM AND 0.4250 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FSC APPLICATION DATA | FUEL CONTROL ASSEMBLY | | LARGEST STEP DIAMETER | 0.3800 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.3800 INCHES NOMINAL | | SECOND END DIAMETER | 0.2720 INCHES MINIMUM AND 0.2750 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.5800 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0600 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2450 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.5650 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.2720 INCHES MINIMUM AND 0.2750 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.1950 INCHES MINIMUM AND 0.2050 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 10 | | STEP QUANTITY | 3 |
|
|