|
|
|
National Stock Number:
3040-00-651-3862
Federal Supply Class:
3040
National Item Identification Number:
006513862
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 519542 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.249 INCHES NOMINAL | | OVERALL LENGTH | 1.940 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5610 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.1800 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0750 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.065 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 5 |
|
|