|
|
|
National Stock Number:
3040-00-647-1120
Federal Supply Class:
3040
National Item Identification Number:
006471120
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 75A1933 | 92400 | TELEX COMPUTER PRODUCTS INC | | A155652 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.2520 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1042 OR STEEL COMP 1043 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OR STEEL COMP 1060 OR STEEL COMP 1080 OR STEEL COMP 1090 OR STEEL COMP 1095 | | NOMINAL THREAD SIZE AND LOCATION | 0.138 INCHES SINGLE HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SPECIAL FEATURES | EDGES OF BORE CHAMFERED 0.031 INCHES -45 DEGREES | | STYLE DESIGNATOR | PLAIN ROUND | | SURFACE TREATMENT | CADMIUM |
|
|