|
|
|
National Stock Number:
3040-00-546-1253
Federal Supply Class:
3040
National Item Identification Number:
005461253
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 553031 | 1UVT5 | BRP US INC | | 553031 | 32195 | OUTBOARD MARINE CORP JOHNSON MOTORS DIV | | 553031 | 80256 | OUTBOARD MARINE CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.551 INCHES NOMINAL | | OVERALL LENGTH | 7.312 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END GROOVE DIAMETER | 0.4050 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0350 INCHES NOMINAL | | SECOND END DIAMETER | 0.4900 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.745 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3920 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 6 | | SECOND END STYLE | CIRCULAR GROOVED, SPLINED (STRAIGHT) AND EXTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 1.000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.4900 INCHES NOMINAL | | STEP QUANTITY | 5 |
|
|