|
|
|
National Stock Number:
3040-00-531-5078
Federal Supply Class:
3040
National Item Identification Number:
005315078
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 5315078 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303SE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 303SE, COND A-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE | | STYLE DESIGNATOR | ROUND STEPPED | | OUTSIDE DIAMETER | 0.688 INCHES NOMINAL | | THICKNESS | 0.375 INCHES NOMINAL | | SMALL END DIAMETER | 0.561 INCHES MINIMUM AND | | 0.562 INCHES MAXIMUM | | BORE DIAMETER | 0.3125 INCHES MINIMUM AND | | 0.3130 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.219 INCHES NOMINAL | | SURFACE FINISH AND LOCATION | 250 MICROINCHES BOTH BEARING FLATS | | 63 MICROINCHES INSIDE PERIPHERY | | SECURING HOLE QUANTITY | 1 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | HOLE DIAMETER AND LOCATION | 0.0938 INCHES NOMINAL SINGLE HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19207 | | DESIGN CONTROL REFERENCE | 5315078 |
|
|