|
|
|
National Stock Number:
3040-00-473-2001
Federal Supply Class:
3040
National Item Identification Number:
004732001
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 67874 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.4530 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.453 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.3970 INCHES MINIMUM AND 0.4000 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.3250 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL LENGTH | 2.360 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | STEP QUANTITY | 3 |
|
|