|
|
|
National Stock Number:
3040-00-163-9107
Federal Supply Class:
3040
National Item Identification Number:
001639107
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 1201565P1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BORE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD ALL MATERIAL RESPONSES OR AISI 416 ASSN STD 1ST MATERIAL RESPONSE OR SAE 51416 ASSN STD 1ST MATERIAL RESPONSE AND QQ-S-763 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 416 OR STEEL COMP 202 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 633 OR STEEL COMP 634 OR STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 | | NOMINAL THREAD SIZE AND LOCATION | 0.138 INCHES SINGLE HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC | | SECURING HOLE QUANTITY | 1 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SMALL END DIAMETER | 0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE FINISH AND LOCATION | 63 MICROINCHES INSIDE PERIPHERY AND 125 MICROINCHES BOTH BEARING FLATS AND 125 MICROINCHES LARGEST OUTSIDE PERIPHERY AND 63 MICROINCHES SMALLEST BEARING FLAT AND 125 MICROINCHES SMALLEST OUTSIDE PERIPHERY | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
|
|