|
|
|
National Stock Number:
3040-00-162-0968
Federal Supply Class:
3040
National Item Identification Number:
001620968
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 14-74235 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 14-74235-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-74235-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2498 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 2.100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5738,TYPE 2 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303SE | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL | | SECOND END DIAMETER | 0.1900 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | SECOND END HOLE DIAMETER | 0.0620 INCHES NOMINAL | | STEP QUANTITY | 7 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|