|
|
|
National Stock Number:
3040-00-159-8805
Federal Supply Class:
3040
National Item Identification Number:
001598805
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 11604991 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | BORE LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | BORE TYPE | PLAIN STRAIGHT OR SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.000 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | LINK END THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MAJOR DIAMETER | 0.875 INCHES MINIMUM AND 0.883 INCHES MAXIMUM | | OVERALL WIDTH | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-11466, CLASS 5 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | IRON | | MINOR DIAMETER | 0.812 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | SHAFT END THICKNESS | 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | SPECIAL FEATURES | OFFSET HEIGHT: 0.470 IN. NOMINAL | | SPLINE QUANTITY | 27 | | STYLE DESIGNATOR | OFFSET, ONE HOLE LINK END |
|
|