|
|
|
National Stock Number:
3040-00-159-3663
Federal Supply Class:
3040
National Item Identification Number:
001593663
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1539584 | 05869 | RAYTHEON COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0910 INCHES MINIMUM AND 1.0950 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 7.088 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 | | SECOND END DIAMETER | 0.8615 INCHES MINIMUM AND 0.8640 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.8125 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.750 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8615 INCHES MINIMUM AND 0.8640 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.6765 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 13 | | STEP QUANTITY | 5 | | SURFACE FINISH | 64.0 MICROINCHES |
|
|