|
|
|
National Stock Number:
3040-00-157-2591
Federal Supply Class:
3040
National Item Identification Number:
001572591
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 139C6888 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.250 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0960 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | FSC APPLICATION DATA | INTERFACE ASSY,LOAD | | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 6.660 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.375 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1255 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.270 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|