|
|
|
National Stock Number:
3040-00-150-7157
Federal Supply Class:
3040
National Item Identification Number:
001507157
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 40-373-218 | 58880 | MEGGITT (NEW HAMPSHIRE), INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.074 INCHES MINIMUM AND 0.076 INCHES MAXIMUM | | FIRST END DIAMETER | 0.0776 INCHES MINIMUM AND 0.0778 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.0560 INCHES MINIMUM AND 0.0580 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 1.150 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM END TO GROOVE | 0.074 INCHES MINIMUM AND 0.076 INCHES MAXIMUM | | SECOND END DIAMETER | 0.0776 INCHES MINIMUM AND 0.0778 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.0560 INCHES MINIMUM AND 0.0580 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | ONE ADDITIONAL GROOVE 0.568 IN. MIN,0.570 IN. MAX FROM FIRST END; 0.012 IN. MIN,0.014 IN. MAX W; 0.056 IN. MIN,0.058 IN. MAX DIA |
|
|