|
|
|
National Stock Number:
3040-00-149-8977
Federal Supply Class:
3040
National Item Identification Number:
001498977
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 5B3635 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.4790 INCHES MINIMUM AND 2.4800 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | OVERALL LENGTH | 15.312 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 2.4790 INCHES MINIMUM AND 2.4800 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 4.312 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.865 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.3125 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | SECOND END;INTERNALLY BORED 0.750 INCH DIAMETER,4.625 INCHES DEEP;THREE IDENTICAL THREADED HOLES EQUALLY SPACED ON BOLT CIRCLE DIAMETER 1.625 INCH NOMINAL,INTERNAL THREAD LENGTH OF 0.688 INCH NOMINAL |
|
|