|
|
|
National Stock Number:
3040-00-143-5345
Federal Supply Class:
3040
National Item Identification Number:
001435345
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10-15740 | 59501 | UNISON INDUSTRIES LLC | | 10-15740 | 77820 | AMPHENOL CORP | | 10-15740Y | 0PYA5 | CONTINENTAL MOTORS, INC. | | 10-15740Y | 59501 | UNISON INDUSTRIES LLC | | 10-15740Y | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL KEYWAY LENGTH | 0.313 INCHES NOMINAL | | FIRST END DIAMETER | 0.1610 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM | | FIRST END KEYWAY DEPTH | 0.071 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.0580 INCHES MINIMUM AND 0.0595 INCHES MAXIMUM | | FIRST END STYLE | FLAT KEYWAY | | LARGEST STEP DIAMETER | 0.590 INCHES MINIMUM AND 0.592 INCHES MAXIMUM | | OVERALL LENGTH | 2.183 INCHES MINIMUM AND 2.193 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6330 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6320 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OR 9-2901 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4335 INCHES MINIMUM AND 0.4345 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.4075 INCHES MINIMUM AND 0.4095 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 36 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.4190 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM | | SECOND END PRESSURE ANGLE | 40.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.4335 INCHES MINIMUM AND 0.4345 INCHES MAXIMUM | | STEP QUANTITY | 4 |
|
|