|
|
|
National Stock Number:
3040-00-142-9441
Federal Supply Class:
3040
National Item Identification Number:
001429441
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 506-0851-002 | 13499 | ROCKWELL COLLINS, INC. | | 506-0851-002 | 95105 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.032 INCHES NOMINAL | | FIRST END DIAMETER | 0.1090 INCHES MINIMUM AND 0.1410 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.0800 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0260 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.359 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | OVERALL LENGTH | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 2ND END DRILLED 0.156 IN. DIA 0.093 IN. DEEP | | SECOND END DIAMETER | 0.1865 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM | | STEP QUANTITY | 3 |
|
|