|
|
|
National Stock Number:
3040-00-141-0315
Federal Supply Class:
3040
National Item Identification Number:
001410315
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 419589-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6210 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.343 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1240 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END HOLE DIAMETER | 0.1860 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM | | SECOND END DIAMETER | 0.5430 INCHES MINIMUM AND 0.5450 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.437 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 |
|
|