|
|
|
National Stock Number:
3040-00-127-2708
Federal Supply Class:
3040
National Item Identification Number:
001272708
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10509 | 54402 | RPS-FL, INC. | | 322509 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 322509 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | DR124305PC33 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | DR124305PC33 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SK122509 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.5000 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 3.625 INCHES NOMINAL | | FIRST END HOLE DEPTH | 2.500 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 3.000 INCHES NOMINAL | | OVERALL LENGTH | 46.125 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 4.188 INCHES NOMINAL | | SECOND END GROOVED FLAT DEPTH | 0.219 INCHES NOMINAL | | SECOND END GROOVED FLAT LENGTH | 1.2500 INCHES NOMINAL | | SECOND END DIAMETER | 2.5000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO FLAT | 4.500 INCHES NOMINAL | | SECOND END STYLE | FLAT GROOVED AND EXTERNALLY THREADED | | STEP QUANTITY | 2 |
|
|