|
|
|
National Stock Number:
3040-00-115-8924
Federal Supply Class:
3040
National Item Identification Number:
001158924
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5801P | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 5801P | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 3.250 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 1.750 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 1.0625 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.5000 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL | | OVERALL LENGTH | 29.625 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 1.625 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.0625 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 1.2500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.625 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | SPECIAL FEATURES | FURNISHED W/TWO NUTS | | STEP QUANTITY | 5 |
|
|