| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, WITH LIGHTENING HOLES |
| BORE STYLE | W/ KEYWAY BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.750 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.188 INCHES |
| HUB NOMINAL DIAMETER | 0.950 INCHES SECOND END |
| HUB NOMINAL DIAMETER | 1.164 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| KEYWAY NOMINAL WIDTH | 0.094 INCHES BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MS5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.438 INCHES BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.059 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.812 INCHES |
| PITCH DIAMETER | 1.7708 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MOUNTING HOLES 120 DEG APART |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE 2 OR 8 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 85 |