|
|
|
National Stock Number:
3020-01-076-7372
Federal Supply Class:
3020
National Item Identification Number:
010767372
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| P4-3-125C | 00141 | ROLLER BEARING CO OF AMERICA, INC |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.104 INCHES | | HUB NOMINAL DIAMETER | 0.313 INCHES FIRST END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB STYLE DESIGNATOR | THREADED SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 BODY | | MATERIAL | STEEL CORROSION RESISTING HUB | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.223 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.9844 INCHES | | NOMINAL OVERALL LENGTH | 0.609 INCHES | | PITCH DIAMETER | 1.9531 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PERIPHERAL FACE, HUBLESS | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 125 | | TOOTH FORM | STANDARD |
|
|