| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.094 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.130 INCHES FIRST END |
| END NOMINAL LENGTH | 0.008 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.045 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.008 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.130 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.060 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 80 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.010 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.210 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.462 INCHES |
| NOMINAL OVERALL LENGTH | 0.265 INCHES |
| PITCH DIAMETER | 0.4295 INCHES MINIMUM AND 0.4455 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 35 |
| TOOTH FORM | STUB |