| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.190 INCHES SECOND END |
| END NOMINAL LENGTH | 0.014 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.156 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.250 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.018 INCHES SECOND END |
| HUB NOMINAL DIAMETER | 0.310 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.032 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.062 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.725 INCHES |
| PITCH DIAMETER | 0.7000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 56 |
| TOOTH FORM | STUB |