| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE NOMINAL DIAMETER | 0.313 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FURNISHED ITEMS AND QUANTITY | 2 SETSCREW |
| END NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| END NOMINAL LENGTH | 0.265 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.250 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.234 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.750 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-18343 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | COPPER ALLOY OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.164 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.500 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.333 INCHES |
| PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| PRESSURE ANGLE | 14.5000 DEGREES |
| SPECIAL FEATURES | MTG HOLES 90 DEGS APART CENTERED ON FIRST END STEP |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB |
| TEETH QUANTITY | 54 |
| TOOTH FORM | STANDARD |