| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.166 INCHES FIRST END |
| END NOMINAL LENGTH | 0.030 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.078 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.270 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.157 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.1660 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.073 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 72 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.046 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.7396 INCHES |
| PITCH DIAMETER | 0.7187 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MTG HOLES 90 DEGS APART |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 69 |
| TOOTH FORM | STANDARD |