|
|
|
National Stock Number:
3020-01-035-9816
Federal Supply Class:
3020
National Item Identification Number:
010359816
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| P17-3-171CQ12 | 00141 | ROLLER BEARING CO OF AMERICA, INC | | SMA720339-2 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.104 INCHES | | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.702 INCHES | | PITCH DIAMETER | 2.6712 INCHES MINIMUM AND 2.6719 INCHES MAXIMUM | | PRECISION CLASSIFICATION | QUALITY NUMBER 12 | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 171 | | TOOTH FORM | STANDARD |
|
|