|
|
|
National Stock Number:
3020-01-023-0065
Federal Supply Class:
3020
National Item Identification Number:
010230065
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 584-720014-002 | 90073 | CMC ELECTRONICS INC |
|
Techincal Specification:
| ATTACHMENT METHOD | MOUNTING HOLE | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.086 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 0.085 INCHES | | HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END | | HUB STYLE DESIGNATOR | PLAIN FIRST END | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.1562 INCHES | | PITCH DIAMETER | 1.1250 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 72 | | TOOTH FORM | STANDARD |
|
|