| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.094 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| END NOMINAL LENGTH | 0.156 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.095 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.145 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.050 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.135 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0312 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.206 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.208 INCHES |
| PITCH DIAMETER | 0.1875 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MTG HOLES SPACED 120 DEG APART |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 18 |
| TOOTH FORM | STANDARD |