| ATTACHMENT METHOD | MOUNTING HOLE |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN MOUNTING HOLES | 3.000 INCHES TRANSVERSELY THROUGH SIDE |
| FACE NOMINAL WIDTH | 0.230 INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 416 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH SIDE |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH SIDE |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH SIDE |
| MOUNTING HOLE TYPE AND QUANTITY | 9 THREADED TRANSVERSELY THROUGH SIDE |
| NOMINAL DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.1150 INCHES TRANSVERSELY THROUGH BOTTOM |
| NOMINAL DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.032 INCHES TRANSVERSELY THROUGH SIDE |
| NOMINAL DISTANCE FROM MOUNTING HOLE CENTER TO BOTTOM | 0.218 INCHES TRANSVERSELY THROUGH SIDE |
| NOMINAL OVERALL LENGTH | 1.0995 INCHES |
| NOMINAL THICKNESS | 0.478 INCHES |
| PITCH HEIGHT | 0.4592 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | SQUARE OR RECTANGULAR |
| TEETH QUANTITY | 12 |
| TEETH TYPE | SPUR |
| TOOTH FORM | STANDARD |