|
|
|
National Stock Number:
3020-00-970-9095
Federal Supply Class:
3020
National Item Identification Number:
009709095
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 102648 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.188 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.125 INCHES | | HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | MATERIAL | ALUMINUM FIRST GEAR | | MATERIAL | ALUMINUM SECOND GEAR | | MATERIAL | STEEL CORROSION RESISTING HUB | | MATERIAL | STEEL CORROSION RESISTING SPRING | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.313 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.0416 INCHES | | PITCH DIAMETER | 2.0000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | ANODIZE FIRST GEAR | | SURFACE TREATMENT | ANODIZE SECOND GEAR | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 96 | | TOOTH FORM | STANDARD |
|
|