| DISTANCE FROM HUB END TO FLANGE END | 0.121 INCHES NOMINAL BB END |
| DISTANCE FROM HUB END TO FLANGE END | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM AA END |
| ASA STANDARD CHAIN NUMBER | 35 |
| BORE LENGTH | 0.520 INCHES NOMINAL |
| BORE TYPE | STRAIGHT SPLINE OR INVOLUTE SPLINE |
| DESIGN FORM | PLAIN |
| FACE WIDTH | 0.160 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
| HARDNESS RATING TEST METHOD | NOT RATED |
| HUB OUTSIDE DIAMETER | 0.720 INCHES NOMINAL BOTH ENDS |
| OUTSIDE DIAMETER | 6.883 INCHES MINIMUM AND 6.923 INCHES MAXIMUM |
| OVERALL LENGTH | 0.520 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1141 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1141 |
| PITCH DIAMETER | 6.688 INCHES NOMINAL |
| PROTRUDING HUB CHARACTERISTIC | PLAIN |
| SPLINE PITCH DIAMETER | 0.4063 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 13 |
| SPLINE LENGTH | 0.520 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.461 INCHES MINIMUM AND 0.471 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| STYLE DESIGNATOR | PLAIN |
| TEETH QUANTITY PER ROW | 56 |
| TEETH ROW QUANTITY | 1 |
| TOOTH PITCH | 0.375 INCHES NOMINAL |