|
|
|
National Stock Number:
3020-00-547-5635
Federal Supply Class:
3020
National Item Identification Number:
005475635
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 310946 | 00088 | ROYAL OAK GAGE INC | | 310946 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| BODY STYLE | WEBBED, OFFSET, SOLID | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 1.684 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 1.060 INCHES | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM BODY | | HARDNESS RATING | 81.0 ROCKWELL C MINIMUM AND 85.0 ROCKWELL C MAXIMUM TEETH | | HUB NOMINAL DIAMETER | 1.969 INCHES FIRST END | | HUB NOMINAL DIAMETER | 1.950 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E9310 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.358 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.745 INCHES SECOND END | | NOMINAL OVERALL LENGTH | 1.831 INCHES | | NOMINAL OUTSIDE DIAMETER | 7.903 INCHES | | PITCH ANGLE | 66.5410 DEGREES | | PITCH DIAMETER | 7.7976 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPLINE PITCH DIAMETER | 1.5625 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 25 BOTH ENDS | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING | | TEETH QUANTITY | 53 | | TEETH TYPE | ZEROL |
|
|